Intelligent Spray Painting Robot
Leading intelligent spray painting robot technology and service
provider. To address the pain points of the traditional maintenance
and painting industry, we provide a comprehensive solution for
painting that is "good, fast, easy, and cost-effective". The
intelligent biomimetic spraying robot, combined with a machine
vision system, simulates the actual manual painting process and
techniques through the Al algorithm, achieving the full process of
autonomous recognition, planning, and operation of the robot for
sheet metal spraying.
Product Introduction
Product Model: TR-90E
l Adaptation scenarios: car disassembly, whole vehicle
l Electricity requirements: 220V 16A air switch
l Gas requirements: Six quick release female connectors
(national/European standards) are reserved in the spray room, and
the
gas needs to pass through an air filter;
l Reserve 3 quick release female connectors (national/European
standards)
around the spray booth
l Network requirements: The spray booth operation area needs to
reserve
one connection to the external network cable.
l Spray gun requirements: 2 SATA5500 manual spray guns (color paint,
clear paint)
l Spray booth requirements: length * width * height ≥ 6.9 * 3.9 *
2.7m
| Components / Type | Whole vehicle
operation | Instruction |
| Frontengine hood | ● | 1.The operation range for painting the whole vehicle:
· length≤5.1m;
·width≤2m;
·0.24m≤height≤1.8m(Do not spray the roof).
·When spraying the roof,the vehicle height must be≤
1.6m.
2.For vehicles with a length less than 4.5m,the front and
rear bumpers cannot be painted simultaneously.
3.When the painting parts include the front fender,front
door and A-pillar,the rearview mirror needs to be
removed during the operation. |
| Front bumper | ● |
| Front fender | ● |
| Front door | ● |
| Rear door | ● |
| Rear fender | ● |
| Rear bumper | ● |
| Roof | ● |
| Skirt | ● |
| A-pillar | ● |
| C-pillar | ● |
| Components / Type | Dismantling parts operation | Instruction |
| Front engine hood | ● | The height range of the disassembly parts operation: 0.24m ≤
operation range ≤ 2m. |
| Front bumper | ● |
| Front fender | ● |
| Front door | ● |
| Rear door | ● |
| Rear fender | ● |
| Rear bumper | ● |
| Roof | / |
| Skirt | / |
| A-pillar | / |
| C-pillar | / |
Intelligent Spray Painting Robot Energy Efficiency Analysis
Work mode: integrated baking and spraying
Average beat time: 1.3 hours per batch, calculated based on 8 hours
of work per day, can complete 6 batches per day.
Capacity analysis: TR-90E (Single Set)
Based on the optimal workflow calculation
Number of
batch
(batch/shift) | Number of pieces
(pieces/batch) | Monthly working days
(days) | Total amount completed
(pieces/month) |
| 6 | 4 | 22 | 528 |
Actual Operation Situation
The quantity of operations is directly proportional to the quantity
of business in the store and the process arrangement. The average actual operation data is: 100 Panels per
month (equivalent to 25-50 vehicles).
Contact us
Zhenglei (Managing Director)
MP: +86-18655370553
Email: Zhenglei@techflyrobot.com
Fengor_Hu (Executive Director)
MP:+86-15665538866 (whatsapp)
MP: +86-18356576525(wechat )
Skype: hufengguang1980
Email: hufengguang@techflyrobot.com
Address: No. 39, Weisi Road, Jiujiang Economic Development Zone,
Wuhu City, Anhui Province,China.
